No paint area: Previously, the component was not created in some situations when you tried to create it in the model. Wraparound gusset cross (60): Previously, connection plates between the gusset plate and the main or secondary part were placed in an incorrect position in some situations. The correct assembly part numbering prefix and start number are now taken from Settings > Options > Components > Part start numbers. Stub connection (119): Previously, the assembly part numbering prefix and start number were incorrectly set for all parts. Tube gusset (20): Previously, certain distance values between the main part and the first selected brace could cause the gusset plate to have an incorrect shape. Special bolt holes are created as defined on the Bolts tab regardless of the gusset plate position. Gusset+ T: Previously, the creation of special bolt holes depended on whether the gusset plate had been set to be above or below the T profile. Gusset+ T: Previously, the connection was not always created in situations where the secondary part had a fitting at the opposite end. Welded to top flange S (149), Full depth S (185), Column with stiffeners (186), Column with stiffeners (188): Previously, notch sizes were not correctly rounded when the secondary part was sloped. The welds are also created to the main part flanges.įull depth (184): Previously, the horizontal bolt edge distance was not applied correctly. This issue has now been fixed.īolted gusset (11), Tube gusset (20), Gusseted cross (62), Bolted gusset (196): Previously, the welds between the stiffeners and the main part were only created to the main part web. Haunch (40): Previously, weld number 4 was created in an incorrect position in some cases. This issue has now been fixed.Įmbedded anchors (008): On the Picture tab, you can now select Half sphere as the shape of the cutout around the anchors.Īutomated reinforcement layout - double tee beam (51): The leg length of stem stirrups is now set correctly as defined in the component dialog box. This issue has now been fixed.Ĭoncrete console (110): Previously, the neoprene connection sometimes connected the wrong parts. This caused connections with other components to break. Reinforced concrete stairs (95): Previously, in some situations, stair part IDs could change when modifying the component. Previously, the maximum number of characters was 20. This issue has now been fixed.Ĭoncrete console (110): The Name property of Dowel defined on the Socket tab can now have a maximum of 62 characters. Braced girder (88): On the Parts tab, you can now specify the axis direction for the Model work plane position: Model XY, Model YZ, or Model ZX.Ĭoncrete console (110): When the anchor was created as a reinforcing bar, the option to add it to the beam did not work, the anchor was always added to the column.
0 kommentar(er)
